CXLS Documentation Home Page

Access CXLS Docs Access CXFEL Docs

Introduction

For the uses of CXLS, we have adapted the existing Reborn repository. Here is the hyperlink for this repo. Specifically, this repository is tailored to the uses at CXLS and gathering and analyzing crystallography data.

Click here to view the documentation for Reborn: Reborn Documentation.

This documentation is still under construction and will be updated regularly.

Installation

Please refer to the README.md file in the repository for installation and setup instructions, available here: available here: README.

Documentation for Reborn

The GitLab repository for reborn can be found here: Reborn Repository.

The documentation for reborn can be found here: Reborn Documentation.

Troubleshooting DCU Notes

Software:

  • Verify that all instructions on README.md have been followed, available here: README.

  • Verify that the DCU is connected to the network (either via ethernet or wifi)

Hardware:

  • Verify that the chiller is running and set to 22°C

  • Verify that the dry air is flowing (just enough that you can feel it on your lip should be plenty)

  • Verify that the blue LED on the power brick is lit

  • Verify that the detector’s POWER switch is depressed

  • Verify that the DCU is powered on and booted, and that the iDRAC LED or display panel do not show any errors